Enter the measurements from your vessel and we work out the length you need – then you can order the right ladder straight away.
The search uses the Norwegian Directorate of Fisheries vessel register, which only lists fishing vessels. For any other vessel, fill in the fields below yourself.
Only used to check which approval applies.
Vertical height from the waterline up to the deck where the ladder is deployed. Use the lightest seagoing condition – that gives the greatest freeboard.
Set 0 if the ladder is fastened at deck level. Otherwise the height up to the rail or bulwark.
Greatest breadth. Filled in when you pick the vessel in the search, or you enter it yourself. Used to work out the extension below the waterline.
Enter the beam and the extension is worked out for a 20° heel. Until then the figure below is used.
The extension lets the ladder reach the water even when the vessel heels 20°. The calculation assumes straight ship sides and is an assumption, not a figure from the regulations.
This calculator is a sizing aid – not a certificate of compliance. Final requirements for length and installation are confirmed by your class society, flag state or the Norwegian Maritime Authority. We go through the measurements with you before any order is confirmed.
The ladder follows the ship's side from the mounting point down. The extension below the waterline means it still reaches the water when the vessel heels 20°.
ExampleThe drawing uses example figures for freeboard, mounting point and beam until you have entered your own.
With no heel, the lower end of the ladder is 0.73 m below the surface.
B = beam of the vessel · F = freeboard to embarkation deck · h = height from deck to mounting point
Enter the freeboard and we will find the right length.